基于定时器的四位数码管时钟程序代码.doc

实验名称:SUMA & BUZZER
实验描述:一个带有闹钟的数码时钟,加三个键,一个调小时键
一个调分钟键,一个设置闹钟时间键
实验方法:TIMER0中断用来计时,控制数码时钟的时间显示
还可设置半秒或四分之一秒,用来控制音调
TIMER1用来控制音普,,
timer0用MODE2自动加载模式 */

# include<reg52.h>
sbit speaker=P2^3 ;

sbit AA=P2^2 ; //调时用
sbit BB=P2^1 ; //调分用
sbit CC=P2^0 ; // 设置闹钟用
sbit P1_7=P1^7; //小数点
// int code seven_reg[]={0xC0,0xF9,0xA4,0xB0,0x99,0x92,0x82,0xF8,0x80,0x90}; //0123456789
int code seven_reg[]={0x40,0x79,0x24,0x30,0x19,0x12,0x2,0x78,0x00,0x10};
// int code scan[]={0x1F,0x2F,0x4F,0x8F}; //1110,1101,1011,0111
int code scan[]={0x1,0x2,0x4,0x8}; //0001,0010,0100,1000
unsigned int timer0_times;
unsigned int timer1_times;
unsigned int timer0_times_AA; //按纽AA用
unsigned int timer0_times_BB; //按纽BB用
unsigned int timer0_times_CC; // 半秒计时用
unsigned int timer0_times_DD; //四分之一秒用
unsigned int timer0_times_EE; // 闹钟用
typedef struct{
unsigned char second;
unsigned char minute;
unsigned char hour;
unsigned char half_second;
unsigned char alarm_hour;
unsigned char alarm_minute;
unsigned char quarter_second ;} time; //此处是固定格式,不能改
time now;
char mode=0;
int i=0,j=0,k=0;
int code tone[]={1012,956,852,759,716,638,568,506,478,426,379};
//7()低音)1234567(中音)123(高音)
int code song[22][2]={ {6,2},{6,2},{7,4},{6,2},{6,2}, {7,4},{6,2},{7,2},
{8,2},{7,2},{6,2},{7,1},{6,1},{4,4},{3,2},{1,2},
{3,2},{4,2},{3,2},{3,1},{1,1},{0,4}
} ;

/********************************************************************/
void timer1_isr() interrupt TF1_VECTOR using 2
{ TR1=0;
TL1=(65536-tone[(song[j][0])])%256;
TH1=(65536-tone[(song[j][0])])/256;
TR1=1;

speaker=~speaker;
}

/*******************************************************************/
void timer0_isr() interrupt TF0_VECTOR using 1
{

/***************************************************/
if(CC!=0) timer0_times_EE=0;
else
{ timer0_times_EE++;
if(CC==0&&timer0_times_EE==4000) //按1S进入设置闹钟模式
{mode++; //500 ~0.125s

if(mode==2) mode=0;
}
}

/**=调时键设置=*/

if(AA!=0) timer0_times_AA=0;
else
{ timer0_times_AA++;
if(AA==0&&timer0_times_AA==500&&mode==0) //500*0.25ms=0.125s
{ now.hour++;
// timer0_times_AA=0;
if (now.hour==24) now.hour=0;//后边代码不会达到此效果
}
if(AA==0&timer0_times_AA==500&&mode==1) //设置闹钟时间HOUR
{ now.alarm_hour++;
if(now.alarm_hour==24) now.alarm_hour=0;
}
}
/***=调分键设置=***/
if (BB!=0) timer0_times_BB=0;
else
{ timer0_times_BB++;
if(BB==0&&timer0_times_BB==500&&mode==0) //0.125s
{ //timer0_times_BB=0;
now.minute++;
if(now.minute==60) now.minute=0;
}
if(BB==0&&mode==0)
{ if(timer0_times_BB==2000) //0.5s
{ now.minute++;
timer0_times_BB=1000;
if(now.minute==60) now.minute=0;
}
}
if(BB==0&&timer0_times_BB==500&&mode==1) //设置闹钟时间MINUTE
{ now.alarm_minute++;
if(now.alarm_minute==60) now.alarm_minute=0;

}
if(BB==0&&mode==1)
{ if(timer0_times_BB==2000) //0.5s
{ now.alarm_minute++;
timer0_times_BB=1000;
if(now.minute==60) now.minute=0;
}
}
}
/*=自然时间设置=*/
timer0_times_DD++; //四分之一秒
if(timer0_times_DD==1000)
{ now.quarter_second++;
timer0_times_DD=0;
if(now.quarter_second==60) now.quarter_second=0;
} //二分之一秒
timer0_times_CC++;
if(timer0_times_CC==2000)
{now.half_second++;
timer0_times_CC=0;
if(now.half_second==60) now.half_second=0;
}
timer0_times++; //一秒一分一时
if (timer0_times==4000)
{ now.second++;
timer0_times=0;
if(now.second==60)
{ now.minute++;
now.second=0;
if(now.minute==60)
{ now.hour++;
now.minute=0;
if(now.hour==24) now.hour=0;
} } }
/******************扫描显示******************************/
switch(mode)
{
case 0 :{
switch(i){ /*0.005秒选一次*/
case 0:
P1=seven_reg[now.minute%10] ;
if(now.half_second%2==0)
P1_7=1; /*实现让它0.5秒闪一次*/
break;
case 1:
P1=seven_reg[now.minute/10];//小数点不亮同,P1_7=1
if(now.half_second%2==0)
P1_7=1; /*为什么不能放在上一句前面昵????*/
break;
case 2:
P1=seven_reg[now.hour %10];

break;

case 3:
P1=seven_reg[now.hour /10];

break;
}} break;

case 1:{
switch(i){
case 0:
P1=seven_reg[now.alarm_minute%10] ;
break;
case 1:
P1=seven_reg[now.alarm_minute/10];
break;
case 2: P1=seven_reg[now.alarm_hour %10];
break;
case 3: P1=seven_reg[now.alarm_hour /10];
break; }
} break;
}

P3=scan[i];
i++;
if (i==4) i=0;
if(now.quarter_second%2==0)
{ k++;
if(k==(song[j][1]*4))
{ j++;
k=0;
if(j==22) j=0;
} } }
/****************************************************************/
void timer0_initialize()
{ EA=0;
TR0=0;
TMOD=0X12;
TL0=(256-250); //0.025ms 自动加载模式 0.025*4000=1s
TH0=(256-250);
ET0=1;
TR0=1;
EA=1;
}
void timer1_initialize()
{
TR1=0;
TL1=(65536-tone[song[j][0]])%256;
TH1=(65536-tone[song[j][0]])/256;
TMOD=0X12;
ET1=1;
}
main()
{ unsigned char m1=0;
speaker=0;
now.alarm_minute=1;
timer0_initialize();
timer1_initialize();
while(1)
{if(now.alarm_minute!=0)//将闹钟设置为0时，相当于取消闹钟，不会响
{ if(now.hour==now.alarm_hour&&now.minute==now.alarm_minute)
{ if(CC==0&&timer0_times_EE==500) m1=1;
switch (m1)
{ case 0:
TR1=1 ;
break;
case 1 :
TR1=0;
speaker=0;
break;
}}
else
{
TR1=0;
speaker=0;
m1=0;
} } } }

#include<reg52.h>
sbit P10=P1^0; //第0位数码管
sbit P11=P1^1;
sbit P12=P1^2;
sbit P13=P1^3;
#define THCO 0xee
#define THLO 0x00
unsigned char miao=0,fen=0,shi=0;
unsigned char code duan[]={0x3F, 0x06,0x5B,0x4F,0x66,0x6D,0x7D,0x07,0x7F,0x6F};
main(void)
{

TMOD=0x11;
TH0=THCO;
TL0=THLO;
EA=1;
ET0=1;
TR0=1;
while(1);
}

void timw0() interrupt 1
{
static unsigned char c=0,k=0;

TH0=THCO;
TL0=THLO;
P1|=0xff;
c++;
if(c>200) {
miao++;
if(miao>=60){miao=0;fen++;}
if(fen>=60){shi++;fen=0;}
c=0;
}
if(k>3){k=0;}
k++;
switch(k-1)
{
case(0):P10=0;P0=duan[shi/10];break;
case(1):P11=0;P0=duan[shi%10];break;
case(2):P12=0;P0=duan[fen/10];break;
case(3):P13=0;P0=duan[fen%10];break;
}

}
这是时钟程序，可以运行，无小数点，显示时分，
小数点断码是0x80，其余的只有靠你自己了。
有问题的话，qq ：1499648096