供应商评价的指标体系.doc
《供应商评价的指标体系.doc》由会员分享,可在线阅读,更多相关《供应商评价的指标体系.doc(13页珍藏版)》请在咨信网上搜索。
供应商评价的指标体系 13 2020年6月23日 资料内容仅供参考,如有不当或者侵权,请联系本人改正或者删除。 供应商评价的指标体系 Evaluation elements Target requirements = 100% 1. Company 1.1 Company profile Economic aspects The company is sound Product range/process range The range of products and processes covers the largest possible proportion of the customer’s total requirements so that as many products as possible can be obtained from a small number of supplier Location The supplier’s location provide optimum transport logistics, communications and safety Market position The supplier is well established in the market (market share) and has a good reputation Innovation rate/innovation potential The supplier has the necessary potential (resource) to fulfill the requirements in terms of innovations 1.2 Management Stability The management shows permanence or, in the event of changes, the necessary opportunity so that the customer can depend on the suppliers long-term predictability Competence Through its conduct, the management shows that it is competent to fulfill the customer’s requirements Customer orientation Through continuous contact with the customer, the management demonstrates its customer-oriented thinking. The measures agreed during visits to and in meetings with the customer are implemented quickly and effectively 1.3 QM system Certification The supplier has a QM system certified in accordance with ISO9000 of a comparable standard Audit results The results of internal quality audits and the results of other customers reveal no serious discrepancies 1.4 Cooperation and service (overall assessment) Partnership The supplier has a Quality Policy aimed at partnership with his customers Partnership is practised in all respects at the interfaces between customer and supplier Flexibility The supplier’s organization is geared to flexibility in terms of cooperation with the customer so that the customer’s wishes are responded to, examined in an appropriate manner and implemented accordingly. This is also demonstrated in the course of day-to-day cooperation with the customer Reliability The supplier shows through his conduct that he is a reliable partner Quality assurance agreement The supplier is prepared in principle to make quality assurance agreements with the customer Accessibility At the interfaces, the supplier offers the necessary technical, organizational and human resources in order to permit optimum communication 2 Technologies 2.1 Product strategy Orientation towards standards As far as it is possible and necessary, the supplier is oriented towards existing standards Orientation towards customer’s needs The product strategy is geared to the needs of the customer with the facility for reponding swiftly to changing needs Systems/modules The supplier is prepared and has the caopabilities required also to supply modules/systems in addition to products 2.2 Production Deployment of technology The technology deployed corresponds to the state of the art Technological competence The supplier is fully competent in the use of the technologies deployed 2.3 Development Development time The development time (time to market) is the shortest by comparison with the supplier’s competitors Samples/prototypes Samples/prototypes are always supplied by the agreed date. The first samples/prototypes comply with the specified requirements Qualification (procedures) The supplier is able to carry out all necessary tests so that there is no need for a complete qualification testing within the customer’s company Market maturity The principal features of the first samples/prototypes (process capability etc.) already show that the series-manufactured products will fully comply with the customer’s requirements 2.4 Cooperation Technical support The supplier can provide support for the customer’s development staff in all aspects of development and thereby play a key role as a valuable partner of the customer Information policy The flow of information from the supplier is comprehensive and allows the customer’s development staff to take into account all aspects of the new product as seen from the supplier’s viewpoint Interfaces The supplier offers sufficient direct contacts to ensure that the information flow is not distorted and/or obstructed by unnecessary detours Documentation The jdocumentation on samples/prototypes is comprehensive and does not five rise to subsequent queries 3 Processed 3.1 Process documentation Procedures All key processed ( opearional and production processed) are documented in a suitable form(procedure) Test points All processes feature suitable test points so that it can be verified that the supplier has a complete command of the processes 3.2 Process control Process conformance The process conformance of the key processes is proven and satisfies the requirements Process changes(frequency) The frequency of the changes is in accordance with the need to increase quality, to reduce costs and to assure supplies to the customer 3.3 Environmental compatibility Consumption of resources The supplier monitors, documents and provides information on the consumption of resources. By comparison with the supplier’s competitors, the consumption of resources in optimal Use of hazardous substances The use of hazardous substances in the manufacturing process in documented and efforts are made to keep the use of hazardous substances to an absolute minimum Environmental pollution Environmental pollution arising from the manufacture application and waste disposal of the products is documented and continuously reduced Risk potential The risk potential arising from the product is already taken into acccount at the development stage and the risks are minimized. Where necessary, suitable labeling is used to draw the attention of the consumer to the remaining risk 3.4 Cooperation Notification of change Important product and process changes are only implemented after prior consultation with customer and are notifiec in food time prior to their planned introduction so that the customer can examine the effects on his current production and, where necessary, obtain the required approval from his customers Reports on process conformance The supplier reports at regular, agreed intervals on the process conformance of the critical products and process parameters 4 Products 4.1 Delivery quality Failure rate The failure rate in ppm is lower that the agreed quality target for all products supplied Reject rate(technical) The reject rate in % of deliveries is below th agreed target value Production failure rate(customer) The number of production failures in ppm (failures which occur in subsequent processing steps) is below the agreed target value Packaging, labelling The complaints regarding deficiencies in packaging and labeling in ppm based on the process steps in below the agreed target value The packaging is practical, provides adequate protection for the products and is limited to what is necessary. The labeling contains all essential information, is clearly legible and is provided with a barcode 4.2 Reliability Failure rate in the field The failure rate in the field(failures in the course of operation by the end user) is below the agreed target value in ppm Results of reliability tests The number of failures in reliability tests carried out by the supplier and the customer is less than the agreed values 4.3 Processing of complaints Failure analysis reports In terms of both from and content, the reports meet the requirements. They contain details of corrective action required to prevent the recurrence of the failure Processing time The processing time for the failure analysis report covering · The initial acknowledgement and · The concluding assessment with · Proposed corrective action Satisfies the requrements Effectiveness of corrective actions The corrective action proposed in failure analysis reports is successful. Recurrent failures do not occur 4.4 Cooperation Interfaces The interfaces and procedures for the exchange of information on products are clearly defined Information The information provided on the products is adequate and satisfactory Early warning system(technical) The supplier operates an early warning system which gives the customer early notification at the occurrence of problems in the supplier’s production Mutual improvement programmes On his own intiative, the supplier takes steps to improve the products the supplies Notification of changes Changes are notified promptly and in detail so that no queries are necessary 5 Deliveries 5.1 Deliveries logistics Ability to deliver The supplier’s ability to deliver is assured even in the event of changes in the requirements due to increased demand For this purpose, regular disclosure of projected quantitative requirements take place between the supplier and the customer. The supplier is proactive in seeking this dialogue Reliability of deliveries The reliability of deliveries, expressed in % of deliveries which comply with the agreed delivery date, is above the target value Reject rate(logistics) The reject rate of the deliveries in % due to logistical errors ( incorrect deliveries, incorrect delivery date etc.) is below the target value Contingency stocks The supplier maintains contingency stocks to assure deliveries in the event of short-term production breakdowns JIT/STS concepts The supplier entirely offers contracts for Just In Time/Ship To Stock deliveries Early warning system(logistical) The logistics of the supplier incorporate an early warning system to inform the customer promptly of delivery delays 5.2 Transport system Transport, packaging The method of transport and form of packaging are selected so as to reliably prevent damage to the products in transit Labeling The labeling conforms to the customer’s requirements Special labeling requirements are taken into account Re-use/waste disposal The form of packaging (material, construction etc.) permits re-use of suitable materials, appropriately marked, which enable a separation Documents accompanying goods The documents which accomany the goods contain all necessary information, clearly presented 5.3 Cost management Sales conditions/terms of payment The supplier accepts the customer’s purchasing conditions and terms of payment or, alternatively, observes normal market practice Pricing practice, discipline The supplier gives reliable, long-term price indications and is prepared to sign long-term delivery agreements with firm prices Cost transparency The costs of the product are broken down clearly so that the main cost elements(materials, production costs, packaging costs, etc.) can be identified and the potential for cost reductions recognized by both parties 5.4 Cooperation Data exchange The supplier has the technical facilities required in order to be able to process cost-effectively the exchange of data(purchase orders, complaints, data sheets etc) via EDI Processing of enquiry and orders The processing time for orders and enquiry conforms to the agreed timescates Response time/flexibility The response time and flexibility meet the agreed requirements Joint cost reduction programmes Together, the supplier and the customer analyze the costs at regular intervals to identify possiblities of cost reductions and initiate appropriate actions Discontinuation of products The discontinuation of products is carried out within a suitab le timescale to allow the customer to develop alternatives without diminishing his ability to deliver 更多免费资料,尽在- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 供应商 评价 指标体系
咨信网温馨提示:
1、咨信平台为文档C2C交易模式,即用户上传的文档直接被用户下载,收益归上传人(含作者)所有;本站仅是提供信息存储空间和展示预览,仅对用户上传内容的表现方式做保护处理,对上载内容不做任何修改或编辑。所展示的作品文档包括内容和图片全部来源于网络用户和作者上传投稿,我们不确定上传用户享有完全著作权,根据《信息网络传播权保护条例》,如果侵犯了您的版权、权益或隐私,请联系我们,核实后会尽快下架及时删除,并可随时和客服了解处理情况,尊重保护知识产权我们共同努力。
2、文档的总页数、文档格式和文档大小以系统显示为准(内容中显示的页数不一定正确),网站客服只以系统显示的页数、文件格式、文档大小作为仲裁依据,个别因单元格分列造成显示页码不一将协商解决,平台无法对文档的真实性、完整性、权威性、准确性、专业性及其观点立场做任何保证或承诺,下载前须认真查看,确认无误后再购买,务必慎重购买;若有违法违纪将进行移交司法处理,若涉侵权平台将进行基本处罚并下架。
3、本站所有内容均由用户上传,付费前请自行鉴别,如您付费,意味着您已接受本站规则且自行承担风险,本站不进行额外附加服务,虚拟产品一经售出概不退款(未进行购买下载可退充值款),文档一经付费(服务费)、不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
4、如你看到网页展示的文档有www.zixin.com.cn水印,是因预览和防盗链等技术需要对页面进行转换压缩成图而已,我们并不对上传的文档进行任何编辑或修改,文档下载后都不会有水印标识(原文档上传前个别存留的除外),下载后原文更清晰;试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓;PPT和DOC文档可被视为“模板”,允许上传人保留章节、目录结构的情况下删减部份的内容;PDF文档不管是原文档转换或图片扫描而得,本站不作要求视为允许,下载前自行私信或留言给上传者【精***】。
5、本文档所展示的图片、画像、字体、音乐的版权可能需版权方额外授权,请谨慎使用;网站提供的党政主题相关内容(国旗、国徽、党徽--等)目的在于配合国家政策宣传,仅限个人学习分享使用,禁止用于任何广告和商用目的。
6、文档遇到问题,请及时私信或留言给本站上传会员【精***】,需本站解决可联系【 微信客服】、【 QQ客服】,若有其他问题请点击或扫码反馈【 服务填表】;文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“【 版权申诉】”(推荐),意见反馈和侵权处理邮箱:1219186828@qq.com;也可以拔打客服电话:4008-655-100;投诉/维权电话:4009-655-100。
1、咨信平台为文档C2C交易模式,即用户上传的文档直接被用户下载,收益归上传人(含作者)所有;本站仅是提供信息存储空间和展示预览,仅对用户上传内容的表现方式做保护处理,对上载内容不做任何修改或编辑。所展示的作品文档包括内容和图片全部来源于网络用户和作者上传投稿,我们不确定上传用户享有完全著作权,根据《信息网络传播权保护条例》,如果侵犯了您的版权、权益或隐私,请联系我们,核实后会尽快下架及时删除,并可随时和客服了解处理情况,尊重保护知识产权我们共同努力。
2、文档的总页数、文档格式和文档大小以系统显示为准(内容中显示的页数不一定正确),网站客服只以系统显示的页数、文件格式、文档大小作为仲裁依据,个别因单元格分列造成显示页码不一将协商解决,平台无法对文档的真实性、完整性、权威性、准确性、专业性及其观点立场做任何保证或承诺,下载前须认真查看,确认无误后再购买,务必慎重购买;若有违法违纪将进行移交司法处理,若涉侵权平台将进行基本处罚并下架。
3、本站所有内容均由用户上传,付费前请自行鉴别,如您付费,意味着您已接受本站规则且自行承担风险,本站不进行额外附加服务,虚拟产品一经售出概不退款(未进行购买下载可退充值款),文档一经付费(服务费)、不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
4、如你看到网页展示的文档有www.zixin.com.cn水印,是因预览和防盗链等技术需要对页面进行转换压缩成图而已,我们并不对上传的文档进行任何编辑或修改,文档下载后都不会有水印标识(原文档上传前个别存留的除外),下载后原文更清晰;试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓;PPT和DOC文档可被视为“模板”,允许上传人保留章节、目录结构的情况下删减部份的内容;PDF文档不管是原文档转换或图片扫描而得,本站不作要求视为允许,下载前自行私信或留言给上传者【精***】。
5、本文档所展示的图片、画像、字体、音乐的版权可能需版权方额外授权,请谨慎使用;网站提供的党政主题相关内容(国旗、国徽、党徽--等)目的在于配合国家政策宣传,仅限个人学习分享使用,禁止用于任何广告和商用目的。
6、文档遇到问题,请及时私信或留言给本站上传会员【精***】,需本站解决可联系【 微信客服】、【 QQ客服】,若有其他问题请点击或扫码反馈【 服务填表】;文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“【 版权申诉】”(推荐),意见反馈和侵权处理邮箱:1219186828@qq.com;也可以拔打客服电话:4008-655-100;投诉/维权电话:4009-655-100。
关于本文