仓库标准管理系统VBAccess源代码.doc

仓库管理系统

项目标建立
这是本人利用闲暇之余在VB6.0上制作一个简陋类库管系统，现图文结合方法一步一步展现制作过程。因为本人是个初学者，里面存在很多不足之处望得到高手们指导。此文可作供初学者们学习交流。作者联络方法：E-mail QQ：
最终运行效果
打开软件出现以下登录界面

输入系统预设用户名及密码（ 1 1 ）单击“登录”或单击“新用户”添加新用户进入以下主界面：

建立工程
1、 创建标准EXE

2、 按“打开”

3、 添加MDI窗体——打开

4、 编辑菜单
在空白处右击——点击“菜单编辑器”

在“标题”里输入“系统”，在“名称”里输入“Sys”（注意此处不能为汉字）

点击“下一个”再点击“ ”

“确定”退到MDI界面点击“系统”——“退出”以下，然后编写代码。

代码以下：
Private Sub Exit_Click()
End
End Sub

数据库建立
VB6.0中能够创建Access数据库。以下建立一个“用户表”数据库，用来存放用户信息及部分出入库管理信息。以下图单击“外接程序”

再单击“可视化数据管理器”出现图

点击“文件”——“新建”——“Microsoft Access”——“Version 2.0 MDB”输入数据库名，“保留”出现以下图

在数据窗口中右击——“新建表”，最终以下

往数据表里添加数据在这里就不罗嗦了，请查阅相关书籍。
登录界面窗口建立
最终界面以下：

1、Adodc1添加过程为：单击“工程”——“部件”出现下图所表示，选择“控件”下“Microsoft ADO Data Control 6.0 （OLEDB）”

单击“确定”在工具栏中会出现“”图标，单击它并拖动到对应位置即可。其它元件不在一一说明。
2、 本窗体代码以下：
Private Sub Command1_Click() '“登录”、“确定”按钮
If Command1.Caption = "确定" And Command2.Caption = "取消" Then '假如为“确定”则添加新用户
If Text1.Text = "" Then '提醒用户输入用户名
MsgBox "请输入用户名！", , "登录信息提醒："
Exit Sub
Else '
Dim usename As String '检测用户名是否已经存在
Dim strS As String
usename = Trim(Text1.Text)
strS = "select * from 用户登录信息表 where 用户名='" & usename & "'"
Adodc1.CommandType = adCmdText
Adodc1.RecordSource = strS
Adodc1.Refresh
If Adodc1.Recordset.EOF = False Then
MsgBox "您输入用户已存在!", , "登录提醒信息："
Text1.Text = ""
Text2.Text = ""
Text3.Text = ""
Text1.SetFocus
Exit Sub
End If
End If
If Text2.Text = "" Then '提醒用户密码不能为空
MsgBox "密码不能为空!", , "登录提醒信息："
Text2.SetFocus
Exit Sub
End If
If Text3.Text = "" Then
MsgBox "请再次输入密码!", , "登录提醒信息："
Text3.SetFocus
Exit Sub
End If
If Text2.Text <> Text3.Text Then
MsgBox "两次输入密码不一致,请确定!", , "登录提醒信息："
Text2.Text = ""
Text3.Text = ""
Text2.SetFocus
Exit Sub
Else
Adodc1.Recordset.AddNew '添加新用户
Adodc1.Recordset.Fields("用户名") = Trim(Text1.Text)
Adodc1.Recordset.Fields("密码") = Trim(Text2.Text)
Adodc1.Recordset.Update
MsgBox ("添加新用户成功，现在您能够登陆系统了！")
Label3.Visible = False
Text3.Visible = False
Command1.Caption = "登录"
Command2.Caption = "退出"
End If
Else '“登录”按钮，用户登录
Dim strSno As String
Dim strSelect As String
strSno = Trim(Text1.Text) '检测用户名是否存在
strSelect = "select 密码 from 用户登录信息表 where 用户名 = '" & strSno & "'"
Adodc1.CommandType = adCmdText
Adodc1.RecordSource = strSelect
Adodc1.Refresh
If Adodc1.Recordset.EOF = True Then
MsgBox "用户名不存在，请重新输入！", , "登录提醒信息："
Text1.Text = ""
Text2.Text = ""
Text1.SetFocus
Exit Sub
End If
If Adodc1.Recordset.Fields("密码") = Trim(Text2.Text) Then '检测密码是否正确
Form1.Hide
'Unload Me
Form2.Show
'MsgBox "登陆成功！", , "登录提醒信息："
Else
MsgBox "密码不正确，请重新输入！", , "登录提醒信息："
Text2.Text = ""
Text2.SetFocus
End If
End If
End Sub
Private Sub Command2_Click() '“退出”或“取消”按钮
If Command2.Caption = "取消" Then
Label3.Visible = False
Text3.Visible = False
Command1.Caption = "登录"
Command2.Caption = "退出"
Text1.Text = ""
Text2.Text = ""
Text1.SetFocus
Else
End 'Unload Me
End If
End Sub
Private Sub Command3_Click() '“新用户”按钮
Label3.Visible = True
Text3.Visible = True
Text1.Text = ""
Text2.Text = ""
Text3.Text = ""
Command1.Caption = "确定"
Command2.Caption = "取消"
Text1.SetFocus
End Sub
Private Sub Command3_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Label6.Visible = True
End Sub
Private Sub Command3_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single)
Label6.Visible = False
End Sub
Private Sub Form_Load()
Label3.Visible = False
Text3.Visible = False
End Sub
Private Sub Timer1_Timer() '时间time1控件time事件代码，用来
'显示向左移动欢迎字幕
If Label4.Left + Label4.Width > 0 Then '当标签右边位置大于0时，标签向左移
Label4.Move Label4.Left - 80
Else '不然标签从头开始
Label4.Left = Form1.ScaleWidth
End If
If Label5.Left + Label5.Width > 0 Then
Label5.Move Label5.Left - 80
Else
Label5.Left = Form1.ScaleWidth
End If
End Sub

主界面窗体
以下：

代码：
Private Sub AddNew_Click()
Frame1.Visible = True
Frame2.Visible = False
End Sub
Private Sub CHKPMCHX_Click()
Frame2.Caption = "出库信息"
Dim pm As String
Dim n As String
pm = InputBox("产品名", "请输入", 0)
n = "select * from 出库表 where 品名 = '" & pm & "'"
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = n
Adodc2.Refresh
Call InitGrid1
End Sub
Private Sub CHKXHCHX_Click()
Frame2.Caption = "出库信息"
Dim XH As String
Dim n As String
XH = InputBox("产品型号", "请输入", 0)
n = "select * from 出库表 where 型号 = '" & XH & "'"
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = n
Adodc2.Refresh
End Sub
Private Sub CKCZ_Click()
'Form2.Hide
Form6.Show
End Sub
Private Sub CKJSHR_Click()
Frame2.Caption = "出库信息"
Dim JSHR As String
Dim n As String
JSHR = InputBox("经手人", "请输入", 0)
n = "select * from 出库表 where 经手人 = '" & JSHR & "'"
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = n
Adodc2.Refresh
Call InitGrid1
End Sub
Private Sub CKSHJ_Click()
Frame2.Caption = "出库信息"
Dim CHKRQ As String
Dim n As String
CHKRQ = InputBox("出库日期，格式为：月/日/年 如：12/1/", "请输入", 0)
n = "select * from 出库表 where 出库日期 = '" & CHKRQ & "'"
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = n
Adodc2.Refresh
Call InitGrid1
End Sub
Private Sub CKZCX_Click()
Frame2.Caption = "出库信息"
Dim ZB As String
ZB = "select * from 出库表 "
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = ZB
Adodc2.Refresh
Call InitGrid1
End Sub
Private Sub Command1_Click()
If Text1.Text = "" Then '提醒用户输入用户名
MsgBox "请输入用户名！", , "登录信息提醒："
Exit Sub
Else '
Dim usename As String '检测用户名是否已经存在
Dim strS As String
usename = Trim(Text1.Text)
strS = "select * from 用户登录信息表 where 用户名='" & usename & "'"
Adodc1.CommandType = adCmdText
Adodc1.RecordSource = strS
Adodc1.Refresh
If Adodc1.Recordset.EOF = False Then
MsgBox "您输入用户已存在!", , "登录提醒信息："
Text1.Text = ""
Text2.Text = ""
Text3.Text = ""
Text1.SetFocus
Exit Sub
End If
End If
If Text2.Text = "" Then '提醒用户密码不能为空
MsgBox "密码不能为空!", , "登录提醒信息："
Text2.SetFocus
Exit Sub
End If
If Text3.Text = "" Then
MsgBox "请再次输入密码!", , "登录提醒信息："
Text3.SetFocus
Exit Sub
End If
If Text2.Text <> Text3.Text Then
MsgBox "两次输入密码不一致,请确定!", , "登录提醒信息："
Text2.Text = ""
Text3.Text = ""
Text2.SetFocus
Exit Sub
Else
Adodc1.Recordset.AddNew '添加新用户
Adodc1.Recordset.Fields("用户名") = Trim(Text1.Text)
Adodc1.Recordset.Fields("密码") = Trim(Text2.Text)
Adodc1.Recordset.Update
Dim X As Integer
X = MsgBox("成功添加新用户，是否要重新登录!", vbYesNo + vbQuestion + vbDefaultButton1, "提醒信息!")
If X = vbYes Then
Unload Me
Form3.Show
End If
'MsgBox ("成功添加新用户！")
'Label3.Visible = False
'Text3.Visible = False
'Command1.Caption = "登录"
'Command2.Caption = "退出"
End If
Frame1.Visible = False
Frame2.Visible = True
Text1.Text = ""
Text2.Text = "'"
Text3.Text = ""
'Form3.Show
End Sub
Private Sub Command2_Click()
Frame1.Visible = False
Frame2.Visible = True
End Sub
Private Sub CXDL_Click()
Form3.Show
'Unload Me
End Sub

Private Sub Exit_Click()
End
Unload Form1
Unload Form2
Unload Form3
Unload Form4
Unload Form5
Unload Form6
Unload Form7
Unload Form8
End Sub
Private Sub Form_Load()
TextUserName = Trim(Form1.Text1.Text)
Unload Form1
Frame1.Visible = False
Call InitGrid0
Me.Height = MDIForm1.Height - 1060
Me.Width = MDIForm1.Width - 560
Me.Top = MDIForm1.Top
Me.Left = MDIForm1.Left
End Sub

Private Sub GHCZ_Click()
'Form2.Hide
Form8.Show
End Sub

Private Sub GHPMCX_Click()
Frame2.Caption = "归还信息"
Dim pm As String
Dim n As String
pm = InputBox("产品名", "请输入", 0)
n = "select * from 归还表 where 品名 = '" & pm & "'"
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = n
Adodc2.Refresh
Call InitGrid2
End Sub

Private Sub GHRCX_Click()
Frame2.Caption = "归还信息"
Dim JCR As String
Dim n As String
JCR = InputBox("归还人", "请输入", 0)
n = "select * from 归还表 where 归还人 = '" & JCR & "'"
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = n
Adodc2.Refresh
Call InitGrid2
End Sub

Private Sub GHSJCX_Click()
Frame2.Caption = "归还信息"
Dim JCRQ As String
Dim n As String
JCRQ = InputBox("归还日期，格式为：月/日/年 如：12/1/", "请输入", 0)
n = "select * from 归还表 where 归还日期 = '" & JCRQ & "'"
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = n
Adodc2.Refresh
Call InitGrid2
End Sub

Private Sub GHXHCX_Click()
Frame2.Caption = "归还信息"
Dim XH As String
Dim n As String
XH = InputBox("产品型号", "请输入", 0)
n = "select * from 归还表 where 型号 = '" & XH & "'"
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = n
Adodc2.Refresh
Call InitGrid2
End Sub

Private Sub GHZCX_Click()
Frame2.Caption = "归还信息"
Dim ZB As String
ZB = "select * from 归还表 "
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = ZB
Adodc2.Refresh
Call InitGrid2
End Sub

Private Sub JCCZ_Click()
'Form2.Hide
Form7.Show
End Sub
Private Sub JCHPMCHX_Click()
Frame2.Caption = "借出信息"
Dim pm As String
Dim n As String
pm = InputBox("产品名", "请输入", 0)
n = "select * from 借出表 where 品名 = '" & pm & "'"
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = n
Adodc2.Refresh
Call InitGrid2
End Sub
Private Sub JCHXHCHX_Click()
Frame2.Caption = "借出信息"
Dim XH As String
Dim n As String
XH = InputBox("产品型号", "请输入", 0)
n = "select * from 借出表 where 型号 = '" & XH & "'"
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = n
Adodc2.Refresh
Call InitGrid2
End Sub
Private Sub JCRCX_Click()
Frame2.Caption = "借出信息"
Dim JCR As String
Dim n As String
JCR = InputBox("借出人", "请输入", 0)
n = "select * from 借出表 where 借出人 = '" & JCR & "'"
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = n
Adodc2.Refresh
Call InitGrid2
End Sub
Private Sub JCSHJCX_Click()
Frame2.Caption = "借出信息"
Dim JCRQ As String
Dim n As String
JCRQ = InputBox("借出日期，格式为：月/日/年 如：12/1/", "请输入", 0)
n = "select * from 借出表 where 借出日期 = '" & JCRQ & "'"
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = n
Adodc2.Refresh
Call InitGrid2
End Sub
Private Sub JCZCX_Click()
Frame2.Caption = "借出信息"
Dim ZB As String
ZB = "select * from 借出表 "
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = ZB
Adodc2.Refresh
Call InitGrid2
End Sub

Private Sub JSHRCHX_Click()
Frame2.Caption = "归还信息"
Dim JSHR As String
Dim n As String
JSHR = InputBox("经手人", "请输入", 0)
n = "select * from 归还表 where 经手人 = '" & JSHR & "'"
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = n
Adodc2.Refresh
Call InitGrid2
End Sub

Private Sub JSHRCX_Click()
Frame2.Caption = "借出信息"
Dim JSHR As String
Dim n As String
JSHR = InputBox("经手人", "请输入", 0)
n = "select * from 借出表 where 经手人 = '" & JSHR & "'"
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = n
Adodc2.Refresh
Call InitGrid2
End Sub
Private Sub PMCX_Click()
Frame2.Caption = "库存信息"
Dim pm As String
Dim n As String
pm = InputBox("产品名", "请输入", 0)
n = "select * from 库存表 where 品名 = '" & pm & "'"
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = n
Adodc2.Refresh
Call InitGrid0
End Sub
Private Sub RKCZ_Click()
'Form2.Hide
Form5.Show
End Sub
Private Sub RKJSHR_Click()
Frame2.Caption = "入库信息"
Dim JSHR As String
Dim n As String
JSHR = InputBox("经手人", "请输入", 0)
n = "select * from 入库表 where 经手人 = '" & JSHR & "'"
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = n
Adodc2.Refresh
Call InitGrid1
End Sub
Private Sub RKPMCHX_Click()
Frame2.Caption = "入库信息"
Dim pm As String
Dim n As String
pm = InputBox("产品名", "请输入", 0)
If Len(pm) > 0 Then
n = "select * from 入库表 where 品名 = '" & pm & "'"
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = n
Adodc2.Refresh
End If
Call InitGrid1
End Sub
Private Sub RKSHJ_Click()
Frame2.Caption = "入库信息"
Dim RKRQ As String
Dim n As String
RKRQ = InputBox("入库日期，格式为：月/日/年 如：12/1/", "请输入", 0)
n = "select * from 入库表 where 入库日期 = '" & RKRQ & "'"
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = n
Adodc2.Refresh
Call InitGrid1
End Sub
Private Sub RKXHCHX_Click()
Frame2.Caption = "入库信息"
Dim XH As String
Dim n As String
XH = InputBox("产品型号", "请输入", 0)
If Len(XH) > 0 Then
n = "select * from 入库表 where 型号 = '" & XH & "'"
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = n
Adodc2.Refresh
End If
Call InitGrid1
End Sub

Private Sub RKZCX_Click()
Frame2.Caption = "入库信息"
Dim ZB As String
ZB = "select * from 入库表 "
Adodc2.CommandType = adCmdText
Adodc2.RecordSource = ZB
Adodc2.Refresh
Call InitGrid1
End Sub

Private Sub Timer1_Timer()
If Label4.Left + Label4.Width > 0 Then '当标签右边位置大于0时，标签向