2023年FURUNO电子海图完整题库.doc

1.What does the alert number 820 indicate?
A. AIS lost
B. TT lost
C. Navtex message received
D. Cross track alarm
2. What does the alert number 450 indicate?
A. Route: Illegal To WPT
B. RADAR comm. Error
C. LAN adapter version error
D. Heading sensor not available
3. What does the alert number 495 indicate?
A. Anchor watch error
B. Track control stopped
C. Steering parameter error
D. Filter: Init.
4. What does the alert number 380 indicate?
A. Route: File read error
B. User chart: File not found
C. AIS COM error
D. User chart: File read error
5. What does the alert number 635 indicate?
A. No official data
B. Log error
C. Dual axis log (WT) error
D. Dual axis log (BT) error
6. What does the alert number 640 indicate?
A. Datum mismatch
B. Chart align: Over 30 min.
C. RADAR antenna ID error
D. Gyro error (Trackpilot)
7. What does the alert number 031 indicate?
A. Sensor adapter 1 COM timeout
B. Sensor adapter 2 COM timeout
C. Sensor adapter 3 COM timeout
D. Sensor adapter 4 COM timeout
8. What does the alert number 257 indicate?
A. Heading sensor not available
B. Prg track: Need higher speed
C. Prg track: Use radius Ctrl
D. Gyro 3 COM error
9. What does the alert number 470 indicate?
A. WGS 84 not used
B. Different geodetic datum
C. Sentence syntax error
D. Datum change
10. Where do you control the settings and visibility of the chart layers?
A. In Chart Legend
B. In Symbol Display
C. In Chart Display
D. In Basic Setting
11. Where do you set the Safety Depth?
A. In Chart Legend
B. In Symbol Display
C. In Chart Alert
D. In Chart Display
12. Where do you set the Shallow Contour?
A. In Chart Legend
B. In Symbol Display
C. In Chart Alert
D. In Chart Display
13.Where do you set the Deep Contour?
A. In Chart Legend
B. In Symbol Display
C. In Chart Alert
D. In Chart Display
14.Where do you set the Safety Contour?
A. In Chart Legend
B. In Symbol Display
C. In Chart Alert
D. In Chart Display
15. Where do you set the Shallow Pattern?
A. In Chart Display
B. In Symbol Display
C. In Basic Setting
D. In Chart Catalogue
16. Where do you control the AIO?
A. In Chart Legend
B. In Symbol Display
C. In Chart Display
D. In Chart Catalogue
17.Where do you select the color Palette used to display the charts?
A. In Chart Legend
B. In Chart Display
C. In Quick Access Bar
D. In Chart Catalogue
18. Where do you switch between Multicolor and Two Color settings for the charts?
A. In Chart Legend
B. In Symbol Display
C. In Basic Setting
D. In Chart Display
19. When an ENC is outlined in Green in the Chart Catalogue - it means?
A. License is valid - chart is up-to-date.
B. License is valid - chart is NOT up-to-date.
C. License is available - chart not installed.
D. License is not available or has expired.
20. When an ENC is outlined in Orange in the Chart Catalogue - it means?
A. License is valid - chart is up-to-date.
B. License is valid - chart is NOT up-to-date.
C. License is available - chart not installed.
D. Cancelled chart.
21. When an ENC is outlined in Magenta in the Chart Catalogue - it means?
A. License is valid - chart is up-to-date.
B. License is valid - chart is NOT up-to-date
C. License is available - chart not installed
D. License is valid - up-to-date status doubtful.
22. When an ENC is outlined in Yellow in the Chart Catalogue - it means?
A. License is valid - chart is NOT up-to-date.
B. License is available - chart not installed.
C. License is valid - up-to-date status doubtful.
D. License is not available or has expired.
23. When an ENC is outlined in Red in the Chart Catalogue - it means?
A. License is valid - chart is NOT up-to-date.
B. License is available - chart not installed.
C. License is valid - up-to-date status doubtful.
D. License is not available or has expired
24. When an ENC is outlined in Blue in the Chart Catalogue - it means?
A. License is valid - chart is up-to-date.
B. License is valid - chart is NOT up-to-date.
C. License is available - chart not installed.
D. Cancelled chart.
25. Where can you find information concerning the charts stored on the HDD?
A. On the Internet.
B. The Chief Officer will know.
C. In the chart catalogue.
D. In the Chart Display menu.
26. How can you tell if your FURUNO ECDIS is displaying an ENC?
A. There is an "ENC Data available" indication in the Own Ship Functions Box.
B. There is an "RNC data" indication in the Own Ship Functions Box.
C. The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.
D. There is no special indication in the Own Ship Functions Box.
27. Where do you find information on Magnetic Variation in the ENCs on the FURUNO ECDIS?
A. In Chart Display
B In Chart Catalogue
C In Chart Alert
D In Chart Legend
28. Which information can you find in the Vector Chart Legend?
A Magnetic Variation
B Base CD number
C Permit expiration date
D Safety Contour setting
29. Which information can you find in the Vector Chart Legend?
A T&&P Notices
B Name
C Warnings
D Safety Contour setting
30. Which information can you find in the Vector Chart Legend?
A Notices To Mariners
B Presentation Library edition number
C Chart edition && Update date
D Safety Contour setting
31. Which information can you find in the Raster Chart Legend?
A Magnetic Variation
B Safety Contour setting
C Quality of data
D T&&P Notice
32.Which information can you find in the Raster Chart Legend?
A Horizontal datum
B Safety Depth
C User Permit number
D License number
33. Which information can you find in the Raster Chart Legend?
A Shallow Contour
B Chart Name
C Chart Viewing date
D Deep Contour
34. Which information can you find in the Raster Chart Legend?
A Edition number
B Last displayed update
C Edition date
D Update issue date
35. How do you switch from Vector chart to Raster chart on the FURUNO ECDIS?
A I select Raster chart in the Main menu.
B I select RNC in the Chart Legend.
C I select Raster chart from the drop down list in the Status Bar.
D I select RNC in the Chart Catalogue.
36. How do you switch from Raster chart to Vector chart on the FURUNO ECDIS?
A I select ENC in the Main menu.
B I select Vector chart in the Chart Legend.
C I select Vector chart from the drop down list in the Status Bar.
D I select Vector chart in the Chart Catalogue.
37.How do you get information on an ENC object (Buoy - Beacon - Berth etc.) on the FURUNO ECDIS?
A I right click on the User Chart function in the route planning tool.
B I click on the Chart Info in the Instant Access Bar.
C I center click on the object.
D I right click on the object.
38 How do you record Own Ship's position on the ECDIS charts when you have a Range/Bearing observation from your RADAR?
A I cannot record own ship's position manually on the FURUNO ECDIS.
B I record LOP in the Record function of the Event Log.
C I press the [CTRL] && [ACQ/ACT] button on the Control Unit.
D I select [Record][Event Log] and [User Event] from the Instant Access bar and insert the observation in the Record User Event window.
<Cell>b
39 Which operation can you perform on the FURUNO ECDIS?
A I can record target ship's positions in the Voyage log automatically.
B I can record a position fix manually by using just one distance and one bearing.
C I can playback my past voyage track on the charts.
D I can send my Route Plan and User Chart and Notes to a FURUNO GPS for display on the GPS.
40 Which operation can you perform on the FURUNO ECDIS?
A I can record my position manually on the ENCs.
B I can set the ECDIS to automatically choosing a Safety Contour based on my setting of Ship's maximum draft.
C I can set Ship's maximum height to enable chart alerts from areas in the charts where there is not sufficient air draft.
D I can send a copy of my Route Plan to an AIS target as a Safety Message.
41 Which operation can you perform on the FURUNO ECDIS?
A I can play back my ship's past track on the ECDIS.
B I can record my position manually on the RNCs.
C I can create Notes from my Voyage Log to document a voyage on the charts.
D I can set the ECDIS to include engine log information into the Voyage log automatically.
<Cell>b
<Cell>1
42 How do you document your previous voyage on the FURUNO ECDIS?
A I use my paper Logbook as documentation.
B I use my paper Logbook and my VDR or SVDR as documentation.
C I use the tracking function in the symbol display.
D I show a playback of my past voyage track on the charts.
43 Which operation can you perform during a voyage?
A I can use the Event function to record special events in the Event Log.
B I can create a User Chart from the Alert Log and save it to a USB memory device.
C I can create a User Chart from the Chart Usage Log and save it to a USB memory device.
D I can create a User Chart from the Voyage Log and save it to a USB memory device.
44 Which operation can you perform during a voyage or after completion of a voyage?
A I can use the Event function to record special events in the Details Log.
B I can view and print a copy of the Voyage Log.
C I can create a backup copy of Own Ship's past track (120 minutes max.) on a USB memory device and keep the copy in a safe location for future reference.
D I can reset the Chart Usage Log after creating a backup copy.
45 Which operation can you perform during a voyage or after completion of a voyage?
A I can use the Record function to record special events in the Voyage Log.
B I can create and save a screen shot for future reference.
C I can view and print a copy of the Details Log.
D I can connect the ECDIS to the Internet and upload all documentation to an external storage.
46 Which operation can you perform after completion of a voyage?
A I can add additional records of manual positions to the Voyage Log adding further detail to the past Voyage.
B I can create a User Chart from the monitored Route Plan and save it to a USB memory device.
C I can create a backup copy of the Voyage log on a USB memory device.
D I can view and print a copy of the Chart Usage Log.
47 Which recording function is available in the FURUNO ECDIS?
A Danger Targets Log
B Engine Log
C Speed Log
D GPS Log
48 Which recording function is available in the FURUNO ECDIS?
A AIS Log
B Engine Log
C Voyage Log
D RADAR Log
49 Which recording function is available in the FURUNO ECDIS?
A Gyro Log
B Engine Log
C Ship's Log
D Details Log
50 How do you manually record Own Ship's current position in the Logs?
A By opening the Voyage Log and entering the current position.
B By right clicking on own ship icon on the user interface.
C By pressing the Record button on the Control Unit.
D By using the record position event function of the Event Log.
51 What is a Manual Update?
A A Manual update is an update applied using the Manual function in Load && Update Charts.
B A Manual update is an update to the charts created by the operator from information received from the Pilot - a Navtex message - a VHF broadcast etc.
C A Manual update is an update applied to the charts by an official representative of the chart producer.
D A Manual update is a chart created using the digitizer function of the FURUNO ECDIS.
52 How do you delete a specific object added using the Manual Update function?
A I select Clear in the Manual Update window.
B I use the Delete function in the File Export tool.
C I right click on the object and use the Manual Update window to delete it.
D I set the View Until date for the Manual Update two months back in time.
53 How do you modify an existing Manual Update object?
A I use the ENC tab of the Chart Maintenance function.
B I use the Mariner tab of the Symbol Display function.
C I cannot modify a Manual Update - only delete it.
D I use the List tab of Manual Update tool function.
54 How can you see if a chart object is created using Manual Updates?
A The Manual Update will be larger than any other chart objects.
B It is always shown in red.
C It will have a special orange marker.
D There is no way I can see if a chart object is created using Manual Updates.
55 Which color scheme is used for a Manual update on the Furuno ECDIS?
A Blue ENC symbols
B Standard ENC symbols
C Orange ENC symbols
D Red ENC symbols
56 Where can Manual Updates be displayed?
A Only on ENCs
B Only on RNCs
C Only on Vector charts
D On all types of charts in the ECDIS
57 Where can you find a list of the Manual Updates that have been applied to the Furuno ECDIS?
A In the Chart Legend
B In the Manual Update Window
C In the Chart Catalogue
D In the Chart Display menu
58 How do you hide (not delete) a Manual Update object?
A I select Clear from the Manual Updates menu.
B I select Undo Last from the Manual Updates menu.
C I deselect that general type of chart object in the Chart Display dialogue.
D I deselect the option from the Symbol Display dialogue.
59 Which Manual Update objects can be hidden from view by operator selection?
A Only the Manual Updates Special Areas (from the Chart Display dialogue)
B All manual Updates objects(from the Chart Display dialogue)
C Only the Manual Updates Buoys (from the Chart Display dialogue)
D Only the Manual Updates Soundings (from the Chart Display dialogue)
60 Can you create a Manual Update from an AIS Safety Message shown on the ECDIS?
A Yes - by manually creating the object.
B Yes - by letting the ECDIS create the object automatically.
C Yes - either by creating it manually or letting the ECDIS create it automatically.
D No
61 Can you create a Manual Update from a Navtex Message shown on the ECDIS?
A Yes - by manually creating the object.
B Yes - by letting the ECDIS create the object automatically.
C Yes - either by creating it manually or letting the ECDIS create it automatically.
D No
62 Where do you change the visibility of your Monitored route?
A In Chart Legend
B In Symbol Display
C In Chart Display
D In Chart Catalogue
63 Where can you update the ENCs?
A In the Chart Manager (Individual Update)
B In the Update function of the Chart Display
C In the Update function of the System Settings
D In the Update function of the Chart Legend
64 Where can you update the RNCs on the Furuno ECDIS?
A In the Update function of the Menu
B In the Chart Manager (Individual Update)
C In the Update function of the Chart Catalogue
D In the Update function of the Chart Legend
65 How do you update your vector charts on the Furuno ECDIS using the ENC Update CD?
A I use the AutoLoad function.
B I create a Manual Update from the information on the CD.
C I create a User Chart.
D I import the information using the Chart Details function in the Chart Catalogue.
66 How are regular T&Ps updated on the ECDIS?
A T&&Ps must always be created as Manual Updates.
B I create a Manual Update containing the T&&Ps using the Manual function in the Load && Update function of t