哈工大机械设计大作业v带传动电算报告--学位论文.doc

Harbin Institute of Technology哈尔滨工业大学 机械设计作业设计计算说明书设计题目： V带传动设计 院 系： 英才学院 班 级： 设 计 者： 学 号： 设计时间： 2012.11.25 哈尔滨工业大学一、程序框图a1=0.7(dd1+dd2)，a2=2(dd1+dd2)输入初估中心距a0,计算 Ld0Add2= 查标准带轮直径表确定dd2YVVmax ?根据型号确定最大带速Vmax，额定功率P0中系数K1,K2,K3，弯曲影响系数KbV=输出该型号带轮系列直径，选择输入小带轮基准直径dd1输入带型号查表求传动比系数Ki查KA, 计算Pd，选型查表求KA, 计算Pd输入P, n1, i输入各原始数据开始减小直径图1 V带设计程序框图B查标准长度确定Ld，同时查取KL，计算实际中心距aA计算小带轮包角查表确定包角系数计算Po，Z10 ?计算Fo, Q,B ( 取整)输出结果计算下一型号带 ？结束计算下一种带轮直径？YYYNNNNB二、V带设计程序function varargout = V_caculate(varargin)%本程序用于计算V带的各项数据%部分中文注释复制出来之后为乱码% V_CACULATE M-file for V_caculate.fig% V_CACULATE, by itself, creates a new V_CACULATE or raises the existing% singleton*.% H = V_CACULATE returns the handle to a new V_CACULATE or the handle to% the existing singleton*.% V_CACULATE(CALLBACK,hObject,eventData,handles,.) calls the local% function named CALLBACK in V_CACULATE.M with the given input arguments.% V_CACULATE(Property,Value,.) creates a new V_CACULATE or raises the% existing singleton*. Starting from the left, property value pairs are% applied to the GUI before V_caculate_OpeningFcn gets called. An% unrecognized property name or invalid value makes property application% stop. All inputs are passed to V_caculate_OpeningFcn via varargin.% *See GUI Options on GUIDEs Tools menu. Choose GUI allows only one% instance to run (singleton).% See also: GUIDE, GUIDATA, GUIHANDLES % Edit the above text to modify the response to help V_caculate % Last Modified by GUIDE v2.5 06-Dec-2012 15:27:18 % Begin initialization code - DO NOT EDITgui_Singleton = 1;gui_State = struct(gui_Name, mfilename, . gui_Singleton, gui_Singleton, . gui_OpeningFcn, V_caculate_OpeningFcn, . gui_OutputFcn, V_caculate_OutputFcn, . gui_LayoutFcn, , . gui_Callback, );if nargin & ischar(varargin1) gui_State.gui_Callback = str2func(varargin1);end if nargout varargout1:nargout = gui_mainfcn(gui_State, varargin:);else gui_mainfcn(gui_State, varargin:);end% End initialization code - DO NOT EDIT % - Executes just before V_caculate is made visible.function V_caculate_OpeningFcn(hObject, eventdata, handles, varargin)% This function has no output args, see OutputFcn.% hObject handle to figure% eventdata reserved - to be defined in a future version of MATLAB% handles structure with handles and user data (see GUIDATA)% varargin command line arguments to V_caculate (see VARARGIN)global Pd yilei erlei chuandongbi zhuansu TYPE Dd1array Dd1 MINMAX P0array Narray Vmax Ldarray Dd1pos Kaarray Klarray Dd2array DSPcellarray CELLDSP TABLEPOS HEADMES;Vmax=25;%ZABC%VP0P0array=0.00 0.04,0.06,0.09,0.10,0.12,0.14,0.16,0.17,0.20,0.22,0.26,0.28,0.30,0.32,0.33,0.34,0.33,0.31;0.00 0.05,0.08,0.13,0.15,0.18,0.22,0.25,0.27,0.32,0.37,0.41,0.45,0.47,0.49,0.50,0.50,0.49,0.48;0.00 0.06,0.09,0.17,0.20,0.23,0.27,0.30,0.33,0.39,0.46,0.50,0.54,0.58,0.61,0.62,0.62,0.61,0.58;0.00 0.10,0.14,0.20,0.22,0.26,0.30,0.35,0.39,0.44,0.50,0.56,0.61,0.64,0.67,0.67,0.66,0.64,0.00;0.00 0.15,0.26,0.40,0.45,0.51,0.60,0.68,0.73,0.84,0.92,1.00,1.04,1.08,1.09,1.07,1.02,0.96,0.80;0.00 0.22,0.39,0.61,0.68,0.77,0.93,1.07,1.05,1.34,1.50,1.64,1.73,1.83,1.87,1.88,1.82,0.00,0.00;0.00 0.26,0.47,0.74,0.83,0.95,1.14,1.32,1.42,1.66,1.87,2.05,2.19,2.28,2.34,2.33,0.00,0.00,0.00;0.00 0.37,0.67,1.07,1.19 1.37 1.66 1.92 2.07 2.44 2.74 2.98 3.16 3.26 0.00 0.00 0.00 0.00 0.00;0.00 0.48 0.84 1.30 1.44 1.64 1.93 2.19 2.33 2.64 2.85 2.96 2.94 2.80 0.00 0.00 0.00 0.00 0.00;0.00 0.59 1.05 1.64 1.82 2.08 2.47 2.82 3.00 3.42 3.70 3.85 3.83 0.00 0.00 0.00 0.00 0.00 0.00;0.00 0.74 1.32 2.09 2.32 2.66 3.17 3.62 3.86 4.40 4.75 4.89 0.00 0.00 0.00 0.00 0.00 0.00 0.00;0.00 0.88 1.59 2.53 2.81 3.22 3.85 4.39 4.68 5.30 5.67 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00;0.00 1.39 2.41 3.69 4.07 4.58 5.29 5.84 6.07 6.34 6.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00;0.00 2.03 3.62 5.64 6.23 7.04 8.21 9.04 9.38 9.62 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00;0.00 2.84 5.14 8.09 8.92 10.05 11.53 12.46 12.72 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00;0.00 3.91 7.06 11.02 12.10 13.48 15.04 0.0 0.000 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00;3.01 5.31 9.24 13.70 14.83 16.15 17.25 16.77 15.63 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00;3.66 6.52 11.45 17.07 18.46 20.06 21.20 0.00 0.000 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00;4.37 7.90 13.85 20.63 22.25 24.01 24.84 0.00 0.000 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00;5.08 9.21 16.20 23.99 25.76 27.50 0.000 0.00 0.000 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00;6.21 10.86 18.55 26.21 27.57 28.32 0.00 0.00 0.000 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00;7.32 13.09 22.49 31.59 33.03 33.40 0.00 0.00 0.000 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00;8.75 15.65 26.95 37.26 38.62 0.000 0.00 0.00 0.000 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00;10.31 18.52 31.83 42.87 43.52 0.00 0.00 0.00 0.000 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00;MINMAX=950,6000;800,6000;700,6000;700,6000;200,600;200,6000;200,6000; 200,5500;200,6000;200,5000;200,4500;200,3600;200,3600;200,3200; 200,2800;200,2400;200,2400;200,2000;200,1600;200,1200; 100,1600;100,1200;100,1200;100,950;100,950;100,950;100,800;100,800;Narray=100,200,400,700,800,950,1200,1450,1600,2000,2400,2800,3200,3600,4000,4500,5000,5500,6000; %LdLdarray=200,224,250,280,315,355,400,450,500,560,630,710,800,900,1000,1120,1250,1400,1600,1800,2000,2240,2500,2800,3150,3550,4000,4500,5000;Dd2array=20,28,31.5,35.5,40,45,50,56,63,71,80,90,100,112,125,140,150,160,180,200,224,250,280,315,355,400,425,450,500,560,600,630,710,800; %Kayilei=1:0.1:1.2;1.1:0.1:1.3;1.2:0.1:1.4;1.3:0.1:1.5;erlei=1.1:0.1:1.3;1.2:0.1:1.4;1.4:0.1:1.6;1.5,1.6,1.8; %Kaarray=220,210,200,190,180,170,160,150,140,130,120,110,100,90; 1.20,1.15,1.10,1.05,1.00,0.98,0.95,0.92,0.89,0.86,0.82,0.78,0.73,0.68;%Klarray=200 zeros(1,6);224 zeros(1,6);250 zeros(1,6);280 zeros(1,6);315 zeros(1,6);355 zeros(1,6);400 0.87 zeros(1,5);450 0.89 zeros(1,5);500 0.91 zeros(1,5);560 0.94 zeros(1,5);630 0.96 0.81 zeros(1,4);710 0.99 0.83 zeros(1,4);800 1.00 0.85 0.82 zeros(1,3);900 1.03 0.87 0.84 0.83 zeros(1,2);1000 1.06 0.89 0.86 0.86 0.83 0;1120 1.08 0.91 0.88 0.88 0.86 0;1250 1.10 0.93 0.90 0.91 0.89 0;1400 1.14 0.96 0.92 0.93 0.91 0;1600 1.16 0.99 0.95 0.95 0.93 0;1800 1.18 1.01 0.98 0.97 0.96 0;2000 0 1.03 1.00 0.99 0.98 0;2240 0 1.06 1.03 1.02 1.00 0;2500 0 1.09 1.05 1.04 1.03 0;2800 0 1.11 1.07 1.07 1.06 0;3150 0 1.13 1.09 1.09 1.08 0;3550 0 1.17 1.13 1.12 1.11 0;4000 0 1.19 1.15 1.15 1.14 0;4500 0 0 1.18 1.18 1.17 0;5000 0 0 0 1.21 1.20 0; %Dd1array=50 63 71 80 75 90 100 125 125 140 160 180 200 250 315 400 355 400 450 500 500 560 630 710; %TYPE=get(handles.popupmenu11,value);switch(TYPE) case 1 set(handles.popup,string,50|63|71|80); case 2 set(handles.popup,string,75|90|100|125); case 3 set(handles.popup,string,125|140|160|180); case 4 set(handles.popup,string,200|250|315|400); case 5 set(handles.popup,string,355|400|450|500); Vmax=30; case 6 set(handles.popup,string,500|560|630|710); Vmax=30;end Dd1pos=get(handles.popup,value); %popupDd1Dd1=Dd1array(TYPE-1)*4+Dd1pos);TABLEPOS=1;changetabledsp(handles.uitable1,deleteall,TABLEPOS,TYPE); set(handles.edit9,string,); % Choose default command line output for V_caculatehandles.output = hObject; % Update handles structureguidata(hObject, handles); % UIWAIT makes V_caculate wait for user response (see UIRESUME)% uiwait(handles.figure1); % - Outputs from this function are returned to the command line.function varargout = V_caculate_OutputFcn(hObject, eventdata, handles) % varargout cell array for returning output args (see VARARGOUT);% hObject handle to figure% eventdata reserved - to be defined in a future version of MATLAB% handles structure with handles and user data (see GUIDATA) % Get default command line output from handles structurevarargout1 = handles.output; % - Executes on selection change in popupmenu3.function popupmenu3_Callback(hObject, eventdata, handles)% hObject handle to popupmenu3 (see GCBO)% eventdata reserved - to be defined in a future version of MATLAB% handles structure with handles and user data (see GUIDATA) % Hints: contents = cellstr(get(hObject,String) returns popupmenu3 contents as cell array% contentsget(hObject,Value) returns selected item from popupmenu3 % - Executes during object creation, after setting all properties.function popupmenu3_CreateFcn(hObject, eventdata, handles)% hObject handle to popupmenu3 (see GCBO)% eventdata reserved - to be defined in a future version of MATLAB% handles empty - handles not created until after all CreateFcns called % Hint: popupmenu controls usually have a white background on Windows.% See ISPC and COMPUTER.if ispc & isequal(get(hObject,BackgroundColor), get(0,defaultUicontrolBackgroundColor) set(hObject,BackgroundColor,white);end function edit1_Callback(hObject, eventdata, handles)% hObject handle to edit1 (see GCBO)% eventdata reserved - to be defined in a future version of MATLAB% handles structure with handles and user data (see GUIDATA) % Hints: get(hObject,String) returns contents of edit1 as text% str2double(get(hObject,String) returns contents of edit1 as a double % - Executes during object creation, after setting all properties.function edit1_CreateFcn(hObject, eventdata, handles)% hObject handle to edit1 (see GCBO)% eventdata reserved - to be defined in a future version of MATLAB% handles empty - handles not created until after all CreateFcns called % Hint: edit controls usually have a white background on Windows.% See ISPC and COMPUTER.if ispc & isequal(get(hObject,BackgroundColor), get(0,defaultUicontrolBackgroundColor) set(hObject,BackgroundColor,white);end function edit2_Callback(hObject, eventdata, handles)% hObject handle to edit2 (see GCBO)% eventdata reserved - to be defined in a future version of MATLAB% handles structure with handles and user data (see GUIDATA) % Hints: get(hObject,String) returns contents of edit2 as text% str2double(get(hObject,String) returns contents of edit2 as a double % - Executes during object creation, after setting all properties.function edit2_CreateFcn(hObject, eventdata, handles)% hObject handle to edit2 (see GCBO)% eventdata reserved - to be defined in a future version of MATLAB% handles empty - handles not created until after all CreateFcns called % Hint: edit controls usually have a white background on Windows.% See ISPC and COMPUTER.if ispc & isequal(get(hObject,BackgroundColor), get(0,defaultUicontrolBackgroundColor) set(hObject,BackgroundColor,white);end function edit3_Callback(hObject, eventdata, handles)% hObject handle to edit3 (see GCBO)% eventdata reserved - to be defined in a future version of MATLAB% handles structure with handles and user data (see GUIDATA) % Hints: get(hObject,String) returns contents of edit3 as text% str2double(get(hObject,String) returns contents of edit3 as a double % - Executes during object creation, after setting all properties.function edit3_CreateFcn(hObject, eventdata, handles)% hObject handle to edit3 (see GCBO)% eventdata reserved - to be defined in a future version of MATLAB% handles empty - handles not created until after all CreateFcns called % Hint: edit controls usually have a white background on Windows.% See ISPC and COMPUTER.if ispc & isequal(get(hObject,BackgroundColor), get(0,defaultUicontrolBackgroundColor) set(hObject,BackgroundColor,white);end % - Executes on selection change in popupmenu9.function popupmenu9_Callback(hObject, eventdata, handles)% hObject handle to popupmenu9 (see GCBO)% eventdata reserved - to be defined in a future version of MATLAB% handles structure with handles and user data (see GUIDATA) % Hints: contents = cellstr(get(hObject,String) returns popupmenu9 contents as cell array% contentsget(hObject,Value) returns selected item from popupmenu9 % - Executes during object creation, after setting all properties.function popupmenu9_CreateFcn(hObject, eventdata, handles)% hObject handle to popupmenu9 (see GCBO)% eventdata reserved - to be defined in a future version of MATLAB% handles empty - handles not created until after all CreateFcns called % Hint: popupmenu controls usually have a white background on Windows.% See ISPC and COMPUTER.if ispc & isequal(get(hObject,BackgroundColor), get(0,defaultUicontrolBackgroundColor) set(hObject,BackgroundColor,white);end% - Executes on selection change in popupmenu5.function popupmenu5_Callback(hObject, eventdata, handles)% hObject handle to popupmenu5 (see GCBO)% eventdata reserved - to be defined in a future version of MATLAB% handles structure with handles and user data (see GUIDATA) % Hints: contents = cellstr(get(hObject,String) returns popupmenu5 contents as cell array% contentsget(hObject,Value) returns selected item from popupmenu5 % - Executes during object creation, after setting all properties.function popupmenu5_CreateFcn(hObject, eventdata, handles)% hObject handle to popupmenu5 (see GCBO)% eventdata reserved - to be defined in a future version of MATLAB% handles empty - handles not created until after all CreateFcns called % Hint: popupmenu controls usually have a white background on Windows.% See ISPC and COMPUTER.if ispc & isequal(get(hObject,BackgroundColor), get(0,defaultUicontrolBackgroundColor)